The PS5’s built-in storage fills up fast once you install a few large games. Sony gives you two ways to add more: an M.2 SSD inside the console, or an external USB drive. They do different jobs. This guide explains which one you need, which drives fit, and how to install one, using Sony’s own requirements.
Two ways to add PS5 storage
| M.2 SSD (inside the console) | USB extended storage | |
|---|---|---|
| Play PS5 games from it | Yes | No, store only; move back to play |
| Play PS4 games from it | Yes | Yes |
| Capacity supported | 250 GB to 8 TB | 250 GB to 8 TB |
| Connection | PCIe Gen4 x4 NVMe expansion slot | SuperSpeed USB 5Gbps or faster, plugged straight into the console (no hub) |
| Fitting | Open the console cover, one screw | Plug in and format |
If you want more space for PS5 games you can actually launch, the M.2 slot is the route. A USB drive is a cheaper parking space for games you’re not playing right now, and for PS4 games.
Which M.2 SSDs fit a PS5
These are Sony’s own requirements for the expansion slot:
| Requirement | What Sony lists |
|---|---|
| Interface | PCI-Express Gen4 x4 M.2 NVMe SSD, Socket 3 (Key M). M.2 SATA SSDs are not supported. |
| Capacity | 250 GB to 8 TB |
| Form factor | 2230, 2242, 2260, 2280 or 22110 |
| Size with cooling | Up to 25 mm wide; up to 11.25 mm thick in total (no more than 8.0 mm above the board and 2.45 mm below it) |
| Read speed | 5,500 MB/s sequential read or faster is recommended |
| Cooling | Required: a heatsink or heat transfer sheet, built in or added by you |
Two warnings from Sony are worth knowing before you buy. First, it can’t guarantee every drive that meets the specifications will work. Second, a drive faster than 5,500 MB/s still won’t necessarily match the console’s built-in SSD in every game. If a game misbehaves on the M.2 drive, Sony suggests moving it back to the internal storage.
Heatsinks: the part people get wrong
- Don’t run a bare drive. Sony says not to use an M.2 SSD without a cooling structure such as a heatsink or heat transfer sheet.
- Watch the thickness. The drive plus heatsink must stay within 8.0 mm above the board and 2.45 mm below it. Sony says single-sided cooling structures are an easier fit.
- The cover is your test. Sony notes that if the expansion slot cover won’t close properly, the cooling structure is likely too big.
- Easiest option: buy a drive sold with a PS5-sized heatsink already fitted, so you don’t have to measure.
How to install an M.2 SSD in a PS5
You need a #1 Phillips screwdriver, a table in a well-lit room, and the latest PS5 system software. The exact cover removal differs between the original PS5 and the slimmer models, so follow Sony’s guide for your model group. The overall steps are:
- Turn off the PS5, unplug all cables, and let it cool. Touch a grounded metal object to discharge static.
- Remove the base and the cover, as shown in Sony’s guide for your model.
- Remove the screw from the long expansion slot cover and lift the cover off.
- Remove the screw and spacer, and move the spacer to the slot that matches your drive’s length.
- Hold the drive by its edges, line it up with the connector notch, and insert it at an angle all the way in.
- Tilt it down onto the spacer and fasten the screw. Make sure the heatsink isn’t blocking the screw.
- Refit the slot cover and the console cover. Don’t power on the console with the covers off.
- Reconnect the cables and turn on the PS5. The formatting guide appears; follow it to format the drive. Formatting erases anything already on it.
After installing: put games on it
- New downloads: Settings > Storage > Installation Location, and choose the M.2 SSD.
- Games you already have: in the Game Library, highlight a game, press Options and select Move Games and Apps.
Using a USB drive instead
A USB drive suits storing games you’ll come back to. It must be SuperSpeed USB 5Gbps or faster, between 250 GB and 8 TB, and plugged directly into the console rather than a hub. PS5 games stored on it have to be moved back to internal or M.2 storage before you can play them. PS4 games can be played straight from it.
How we checked
Sources and limits (checked 3 November 2026)
- The M.2 requirements, heatsink rules and installation steps come from PlayStation’s own support page.
- USB extended storage details come from Make Tech Easier’s walkthrough of Sony’s requirements.
- Drive specs come from Samsung’s 990 PRO data sheet and Lexar’s NM790 page.
- We have not installed these drives ourselves, and we have not measured load times.
Two M.2 SSDs that meet Sony’s requirements
1. Samsung 990 PRO with Heatsink
Why it fits: well above Sony’s recommended 5,500 MB/s read speed, and the heatsink version comes ready to install.
Check: that the listing is the with heatsink version, and the capacity you want.
2. Lexar NM790 (with heatsink)
Why it fits: Lexar says it meets every PS5 requirement, and sells a version with a heatsink sized for the console.
Check: that the listing includes the heatsink. The bare drive needs a separate cooling structure.
Organising the rest of your console setup? See our console accessories guide for charging docks and mounts, and if your controller keeps dropping out, our guide to fixing a PS5 controller that keeps disconnecting.
Frequently asked questions
Can I play PS5 games from an external USB drive?
No. You can store PS5 games on USB extended storage, but you have to move them to the internal SSD or an M.2 SSD to play them. PS4 games can be played from a USB drive.
What is the biggest SSD a PS5 supports?
Sony lists M.2 SSDs from 250 GB to 8 TB for the expansion slot.
Do I need a heatsink for a PS5 SSD?
Yes. Sony says not to use an M.2 SSD without a cooling structure such as a heatsink or heat transfer sheet, and the drive plus cooling must stay within 11.25 mm thick.
Does a faster SSD load PS5 games faster?
Not always. Sony recommends 5,500 MB/s or faster, but notes that not every game will perform exactly as it does on the console’s built-in SSD, even with a faster drive.
Do I have to reinstall games after adding an SSD?
No. You can move installed games to the new drive from the Game Library with Move Games and Apps, and set it as the default install location for new downloads.
